Most LED neon signs can be hung in minutes with the hardware supplied. This guide covers wall mounting, wire hanging, window display, and outdoor installations.
1. Wall Mounting (Standoff Screws)
- Hold the sign against the wall and mark the pre-drilled holes with a pencil. Use a spirit level to ensure it’s straight.
- Drill pilot holes into the wall and tap in the supplied drywall/masonry anchors.
- Screw the cylindrical standoff bases into the wall.
- Place the sign over the standoff bases and hand-tighten the screw caps.
- Connect the sign cable to the dimmer and plug into the wall socket.
2. Hanging Installation (Ceiling or Window)
Attach the included stainless steel hanging wires through the top eyelet holes of the acrylic backing. Secure the ceiling hooks and adjust cable clamps to your desired height.